How to RDP from Windows 7/10/11 to Get Linux Mint


This tutorial covers how to RDP from Windows 7/10/11 to get Linux Mint. We will do our best to make sure you understand this guide. I hope you will like this blog How to RDP from Windows 7/10/11 to Get Linux Mint. If your answer is yes, please share after reading this.

Check out how to RDP from Windows 7/10/11 to get Linux Mint

I installed Linux Mint on a home test system that I use to experiment with Linux in general, but my main daily controller is a Windows 10 PC. I needed a simple solution to connect to my Linux Mint system. from Windows or Mac without having to install a lot of software. Information on installing XRDP, x11VNC, and other similar programs is available on the Internet. It all seemed a bit difficult to me, especially since Linux Mint comes with built-in desktop sharing.

This is not a problem for me as I am only connected to the Linux system from my local network. If you need encryption for the remote connection, I’ll write another article on how to implement it shortly, as it’s a bit more complicated.

How to do

Under Linux Mint, click on the menu button, preferences then Share desktop. This will open the Desktop sharing preferences screen where you can allow other users to log in to the Linux system.

Below Exchange, go ahead and check the Allow other users to see your desktop Yes Let other users control your desktop boxes. Below Security, it’s probably a good idea to uncheck the You must confirm each access to this machine as this would require you to confirm the remote connection locally before it is accepted. If you are allowing someone else to access your machine, it is probably worth checking out so that you can control when someone logs into your machine.

To prevent someone from signing in to your device, check the Ask the user to enter this password and enter a strong enough password. Click on Close as we are done with this dialogue.

Install the dconf editor

Next, we need to disable the encryption currently required by Vino, which is the package installed by default in Linux Mint. We need to install the dconf editor so that we can change the default settings.

  • Open Terminal and type the following command:

sudo apt-get install dconf-editor

  • Once the package is installed, click on the Linux Mint menu, then All applications and scroll until you see Dconf editor.
  • Open the editor, then go to organizationgnomeoffice remote access.

In the right pane, go ahead and uncheck the box require encryption checkout. Close the editor then restart your Linux machine. Once you have reconnected, we can try to connect.

Connect using the VNC client

At this point, you can download your favorite VNC client for Windows and connect to the Linux machine. In my case, I used the VNC Viewer program from RealVNC. You don’t have to register or pay anything to use the viewer.

Type the IP address of your Linux box and press Enter. Since there is no encryption, a pop-up dialog will appear telling you that your connection is not secure. After this message is passed, you will need to enter the password you entered when configuring the desktop sharing settings for the first time in Linux Mint.

Final words: How to RDP from Windows 7/10/11 to get Linux Mint

hope you will understand this item How to RDP from Windows 7/10/11 to Get Linux Mint, if your answer is no, you can request anything through the contact forum section linked to this article. And if your answer is yes, then share this article with your family and friends.


Comments are closed.